Tomken Tow Plate no recv TMT-0823-x

I have been getting questions on our tow plate, wondering if it works with stock bumper and some aftermarket bumpers. It will work with stock bumpers and aftermarket bumpers if they do not drop lower than the stock one. In the picture it shows the original plate with just the one tab on each side. We now have two tabs so it will accommodate the Reese tow bar. You are also able to use tow hooks with this plate.

 

Pre 97 XJ Front and Rear Installs

Installed TMF-0635-B  XJ 84-96 Front Bumper with receiver and D-ring mounts and TMG-1500-XJ Grill Guard, just in time. The animals are getting thick out on the highway.

On the Rear is TMR-0720-B XJ 84-96 Rear Bumper with receiver, TMC-0105-8496 Swing out tire carrier ( includes license plate relocation bracket) and TMC-0112-SG Single Gerry Can and Hi – Lift Mount. 

Putting some Under Armor on this JK

Rear control arm skid plates

Rear control arm skid plates

AEV Rear Differential Skid

Rock Hard Fule Tank Breather Canister Skid

Front control arm skid plates

Tomken JK Sway Bar Skid Plate

Custom brackets to mount roof rack to rear bumper

Custom brackets to mount roof rack to rear bumper

Tomken JK Rear Bumper with D-Ring Mount

Tomken JK Spare Tire Relocate Braket

Tomken JK Rear Bumper with D-Ring Mount

Tomken JK Spare Tire Relocate Braket

Tomken JK 2 x 6 Rock Bars. 

Besides protecting the Jeep makes an awesome step.

 Custom Skid to protect the towing mounts

 Custom Skid to protect the towing mounts

 Custom Skid to protect the towing mounts

Custom JK Tomken Front Bumper

Customer needed to be able to use his winch front or rear and wanted Hi-lift down on the bumper. We made our JK Stubby bumper with D-ring Mounts and Brush Guard and added mounting for the Hi-Lift and receiver for the winch. Ran wiring to front and rear for the winch. 

Tomken JK Front Stubby bumper with custom mounting for
Hi-lift Jack and top receiver for removable winch.  

New Towing Products

We have discontinued some of our towing parts and added new ones. This should help to determine what you need to be able to tow your Jeep. We now offer an adjustable tow bar that comes with mounting brackets so you can drill and bolt to your steel bumper. Tomken now has a mounting kit to mount tow bar TMT-0821-V to any Tomken steel bumpers that have D-ring Mounts.  For the XJ towing, everything you need to hook up and go if you have a stock bumper or other aftermarket bumper. Just a reminder that All Tomken Bumpers can be made  to accommodate Blue Ox Tow Bars, Road Master Falcon Tow Bars and others. Needing help please call 719-395-2526  x-2.

The Jeep Bug

In the fall a couple walked in the front door wanting a way to mount extra lights to the front of the jeep. They had been out on a trail and it got dark and they were sort of lost for a little while. The wife wanted more light so they could see. Well that week we sold them the Front bumper, with brush guard, a winch plate and winch. He purchased the lights and had us put them on. Well they will have no problem  with lighting now.

Well the jeep bug hit them. Next trip in was the complete rear system. You have to have a place to carry a hi lift jack and extra gas, so you don’t get stranded.



Ok, when putting all this steel on you may loose an 1” in clearance. Yes your correct, it is lift time. We just installed 4” lift, and 35” tires

Now that the lift is on, he knows he will be doing a little more aggressive trails and needed the gas tank skid, rock bars, and custom tube fenders. Wow  what a build.



He is ready to go and just think this all started with wanting a light bar. He got the bug bad, HIGH FEVER. It’s a Jeep thing you would not understand!

CUSTOM PORSCHE TRAILER HITCH

 Customer requested a trailer hitch for a
Porsche. He needed to haul his motor
cycle behind.
 
 

TOYOTA CUSTOM FRONT AND REAR BUMPER

CUSTOM REAR BUMPTER MADE OF 2 X 6 RECT STEEL TUBING. POWDER COATED

BLACK.

CUSTOM FRONT BUMPER 2X6 RECT  STEEL FORMED TO FIT. HAS CUT OUTS FOR BLINKERS AND AIR FLOW. RECV TO ACCOMADATE A PROTABLE WINCH PLATE AND WINCH

REMOVABLE WINCH PLATE MADE TO SLIDE INTO 2 INCH RECV WITH HANDLES FOR EASY HANDLING.

 

UNITED METHODIST CHURCH CROSS AND FLAMES

Our shop was commissioned back in December by the Celeste Texas United Methodist Chruch to make a Cross and Flames for the new fellowship hall complex. The completion of the construction project is almost done and they have shared photos of the new hall. It is a beautiful hall and I know they will enjoy.

Christmas Specials 2011

First Jeff, Dave and myself want to wish everyone a VERY MERRY CHRISTMAS and A Happy New Year. We will be having sales on different items here in the next 2 weeks that you might want to check out. You may want to keep checking back because items may change day to day. If you need something you don’t see be sure to give us a call and we will see what we can do. Again Merry Christmas and GOD BLESS.

Custom Steel Gates

Wanted to share with you pictures of custom steel gates that were made for a home here in Buena Vista Colorado. They were placed on an outer adobe wall fence surrounding the patio. Made of ¾” square tubing and powder coated black.

JK Front Winch Bumper with Blue Ox Tow Bar Mounting Brkts

Installed this front JK winch bumper with tow bar mount to fit a Blue Ox Tow Bar and a sway bar disconnect skid plate on a 2012 JK. Thank you Larry have a great winter and see you next summer.

JK front winch ready bumper is made out of ¼" and 3/16" form fitted steel. This narrow design gives you a better approach angle when encountering those large rocks on the trail. The D-ring tow mounts are made of ¾" steel and are designed to be used with Tomken Universal Tow Bar. Brush guard is made of 1 ½ x 1/8 wall tube with light tabs or you can mount your hi-lift jack to it. Powder coated black. You may also order custom to fit Road Master Falcon Alterain or Blue Ox Tow Bars at same price.

Made of heavy 3/16 steel plate. Protects Sway Bar Disconnect. Bolt on. Some drilling required.